APOLLO AUTOMATIONJAMES WARREN · ENGINEERING & PROJECT LEADERSHIP

Asset

A6 Acetator

Explore the related engineering activities and portfolio connections.

Conceptual engineering visualization: Acetator Expansion Project + VOC Scrubber Systems
Conceptual engineering visualization · AI generated

Explore the Connections

A6 Acetator Low Grain Conversion and Airflow Investigation ↗Acetator #6 and ACV Filtering Expansion ↗Acetator #6 and Wine Vinegar Filtering Expansion ↗A5/A6 Acetator Expansion and VOC-Recovery Integration ↗A6 Acetator Workstream Updates and Inspection Protocol ↗Acetator #6 and ACV Filtering Expansion ↗Coordinated A5 / A6 Acetator Expansion, VOC Scrubbers, Cooling Utilities, Pump House, Civil Foundations, Electrical / Controls Systems, and Process Transfer/Loadout Infrastructure ↗Scoped A6 Acetator Capability, Centrifuge Clarification, Ceramic Vinegar Polishing and Final-Loadout Coordination ↗Separate Biological/Process Effects from Mechanical Aeration Causes ↗Investigate Declining Grain Conversion ↗Compare HMI Airflow with Manual Meter Readings ↗Convert Airflow Between CFM and m3/Hr ↗Compare Expected and Measured Airflow ↗Quantify Airflow Deficit ↗Check Bearing Temperature with Thermal Imaging ↗Compare A6 and A5 Bearing Temperatures ↗Inspect Abnormal Equipment Noise ↗Inspect Shaft Wobble ↗Eliminate Visibly Open Inlet-Air Valve Position as a Cause ↗Check Apparent RPM Differences as a Possible Cause ↗Coordinate Correction of Displayed Motor Amps Against the Panel Reading ↗Define Motor-Current Trending Against Percent Full-Load Amperage ↗Specify Correction of the Erroneous Bearing Display Using the Thermal Imaging Reference ↗Specify the 230 F Bearing-Temperature Alarm ↗Define the Airflow-Trend Repair ↗Compare A6 Workstream Gaps ↗Define the Airflow Full-Load Operating Reference ↗Specify Operator Airflow Checks During Charge and Discharge ↗Define the Steady-State Motor-Loading Threshold for Operator Checks ↗Develop the Operator Checklist ↗Review Bearing-Grease PM ↗Audit Bearing PM Practices ↗Specify Tank Drainage Before Internal Inspection ↗Specify Tank Rinsing Before Internal Inspection ↗Specify Tank Ventilation Before Internal Inspection ↗Specify the 24-Hour Ventilation Preparation Period Before Internal Inspection ↗Define the Internal-Aerator Inspection ↗Define the Fiber-Seal Inspection ↗Define Acetator-Coupling Inspection or Verification ↗Define Inspection of Internal Aeration Piping ↗Plan Inspection and Maintenance Parts Kits ↗Coordinate Controls Actions ↗Coordinate Operator Actions ↗Coordinate Maintenance Actions ↗Coordinate Vendor Actions ↗Establish Inspection and Recommissioning Readiness ↗Retain Startup FLA Question at 4000 Gallons ↗
All portfolio connections (48)

WHAT COMES NEXT

Complex Challenge?
Let’s Work Through It.

Engineering leadership, capital projects, and independent consulting.

Start a conversation ↗