Pilots, Trials, and Production-Scale Evaluation — Application Review

Does trial evidence represent the intended production conditions?

Connect sampling, uncertainty and acceptance criteria to equipment selection and scale-up decisions.

Complementary capabilities: Plan Sampling and Supplier-Quality Decisions, Assess Statistical Confidence and Sample Adequacy.

• Compared Separation Options for Clarity, Throughput, Dissolved-Oxygen Risk, Service, Maintenance, Installed Cost, Utilities, Controls and Cross-Site Trial Requirements — Recorded application
• Coordinated and Reviewed Vendor/Site Rental-Trial Evidence, Planned Production/CIP Profiling, and Applied the Observations to Later Equipment and Controls Decisions — Recorded application
• Decanter Pilot Feed and Performance-Test Plan — Recorded application
• Defined and Submitted the Unfiltered Rice-Wine Sample and Process Basis to Decanter Supplier, Including the Recovery Target for a Feasibility Study — Recorded application

Does trial evidence represent the intended production conditions?

Connect sampling, uncertainty and acceptance criteria to equipment selection and scale-up decisions.

Complementary capabilities: Design Experiments to Compare Process Factors, Plan Sampling and Supplier-Quality Decisions.

• Coordinated and Reviewed Vendor/Site Production Trials — Recorded application
• Coordinated and Reviewed Vendor/Site Rental-Trial Evidence, Planned Production/CIP Profiling, and Applied the Observations to Later Equipment and Controls Decisions — Recorded application
• Decanter Pilot Feed and Performance-Test Plan — Recorded application
• Decanter Supplier Characterized the Rice-Wine Sample, Varied g-Force and Residence Time, Found Decanter and Sedicanter Separation Feasible, and Recommended Dynamic Pilot Testing at the Required Clarity and Throughput — Recorded application

Does trial evidence represent the intended production conditions?

Connect sampling, uncertainty and acceptance criteria to equipment selection and scale-up decisions.

Complementary capabilities: Validate Measurement Accuracy and Repeatability, Establish Process Baselines and Interpret Variation.

• Addressed Suspended Solids Ahead of Acetation — Recorded application
• Decanter Pilot Feed and Performance-Test Plan — Recorded application
• Defined Onsite Trial Measurements for Turbidity, Solids Concentration, Product Recovery, Wine Loss, Water, Electrical Use, Waste Volume and Operator Labor — Recorded application
• Evaluated Throughput Against the Documented 40 GPM Target — Recorded application

Does trial evidence represent the intended production conditions?

Connect sampling, uncertainty and acceptance criteria to equipment selection and scale-up decisions.

Complementary capabilities: Prioritize Causes and Corrective Actions, Balance Flow, Pressure and Pumping Duty.

• Coordinated the Vendor's Deaeration-Nozzle Correction — Recorded application
• Reviewed the Vendor's Interpretation of the Residual Turbidity as a Dissolved-Solids Limitation — Recorded application
• The Vendor Identified a Missing Brew 250 Deaeration Nozzle and Temporarily Fitted a Larger Nozzle While the Specified Small Orifice Was Being Obtained — Recorded application
• The Vendor Interpreted the Approximately 36–40 NTU Residual as a Dissolved-Solids Limitation on Further Turbidity Reduction — Recorded application

Does trial evidence represent the intended production conditions?

Connect sampling, uncertainty and acceptance criteria to equipment selection and scale-up decisions.

Complementary capabilities: Model Systems, Interfaces and Traceability, Plan Verification and Requirement-Based Acceptance.

• Decanter Pilot Solids and Caustic Containment — Recorded application
• Planned Decanter Trial Setup and Temporary Utilities — Recorded application
• Planned Temporary Tri-Clamp and Camlock Connections, Sanitary Sampling Valves, Hoses, Drain Routing, CIP Adaptation, Flow Measurement, HMI Access, Vendor Laboratory Support and ROI/TCO Evaluation — Recorded application

Does trial evidence represent the intended production conditions?

Connect sampling, uncertainty and acceptance criteria to equipment selection and scale-up decisions.

Complementary capabilities: Evaluate Investment Returns and Lifecycle Economics, Test Investment Decisions Against Uncertainty.

• Centrifuge Trial Objectives and Capital-Project Planning — Recorded application
• Coordinated and Reviewed Vendor/Site Rental-Trial Evidence, Planned Production/CIP Profiling, and Applied the Observations to Later Equipment and Controls Decisions — Recorded application
• Decanter Feasibility and Investment-Decision Deliverables — Recorded application
• Defined Filtration Quality, Capacity and Filter-Aid Cost Criteria for the Centrifuge Option and Its Post-Purchase-Order Completion Plan — Recorded application

Does trial evidence represent the intended production conditions?

Connect sampling, uncertainty and acceptance criteria to equipment selection and scale-up decisions.

Complementary capabilities: Plan Sampling and Supplier-Quality Decisions, Assess Statistical Confidence and Sample Adequacy.

• Coordinated and Reviewed Filtration Supplier's Laboratory Cleanability Study, Using the Vendor's Neutralization, Temperature and Particulate Findings to Inform a Production-Validation Decision — Recorded application
• Filtration Supplier Tested Dilute Sodium-Hydroxide Neutralization of Residual Acetic Acid at Laboratory Scale; the Study Found No Identified Crystal-Like Particulate and Recommended Production Validation — Recorded application